2 August 2021
At the invitation of the Ministry of Emergency Situations of Russia, “Prioritet” once again became a participant in the salon. At the invitation of the Main Directorate of the EMERCOM of Russia, “Priority” once again became a participant of the exhibition. This year «Prioritet» company represented following products: — Fire-fighting and rescue vehicle APS 3,0-40 […]
At the invitation of the Ministry of Emergency Situations of Russia, “Prioritet” once again became a participant in the salon.
At the invitation of the Main Directorate of the EMERCOM of Russia, “Priority” once again became a participant of the exhibition.
This year «Prioritet» company represented following products:
— Fire-fighting and rescue vehicle APS 3,0-40 (Kamaz-43265);
— Multipurpose first-aid appliance APP-0,2 (GAZ-С41A43);
— Hose tender АR-2 (Kamaz-43118);
— Foam extinguishing vehicle with the mast APTm-3,0-50-18 (Kamaz -53605);
— Fire pump station PNS-100 (Kamaz-43118).
Innovative extinguishing technologies such as high pressure water mist extinguishing unit and water jet cutting unit were represented on fire-fighting and rescue vehicle APS-3.0-50 on the chassis KAMAZ-43265, with a wheel formula 4 × 4.
APS has a water tank with the capacity 3.0 m3, foam tank 180 l³. A fire pump is installed in the rear compartment: centrifugal, normal pressure, with an automatic vacuum system. The rated power of the pumping unit is 40 l / s, the delivery head is 100 meters.
The APS cabin is designed for six people, including the driver, and consists of two separate cabins: the driver’s cabin and the crew’s cabin. Crew cab is frame-panelled. Interior and exterior of the cab frame is made of plastic panels made of polymer material, reinforced with fiberglass and impact-resistant plastic. Fastening of panels to the frame is carried out using adhesive technology.
The outer body lining is made of aluminum sheets. Fastening of the sheathing to the frame is glued.
At the stand of the partner of the company KAMAZ were exhibited:
Foam extinguishing vehicle with the mast APTm-3,0-50-18 (increased lift capacity chasis KAMAZ-53605) with a 4×2 wheel arrangement.
Vehicle is designed to deliver fire-fighting crew, fire-fighting equipment to the place of fire and to carry out actions at the enterprises of the petrochemical industry and in places of storage of petroleum products.
The vehicle is equipped with a 3000l³ water tank, a 180l³ foam tank, a fire pump with foam dosing device and 18m telescopic foam tower. The vehicle is also equipped with a fire monitor with a capacity of 50 l / s. Remote control of the fire monitor.
The fire superstructure is an aluminum framework with an outer lining of aluminum sheets using adhesive technology. Doors of compartments of roller shutters type.
Fire pumping station PNS-100 (chassis KAMAZ-43118) with a 6×6 wheel arrangement is designed to supply water through main hose lines to portable fire monitors or to fire trucks, can be used to make a water reserve in the immediate vicinity of the fire site. The rated power of the pump is 100 l / s. Maximum suction height is 7.5 m.
Hose tender AR-2 (on the chassis KAMAZ-43118 ) with a 6×6 wheel arrangement is designed to deliver fire-fighting crew, big quantity of pressure hoses, fire-fighting equipment to the place of fire; laying hose lines from the water source to the place of extinguishing the fire, as well as for mechanized collection of the hoses. The body of this truck is made of structural steel with aluminum lining, adhesive technology, roller shutters. The total length of the pressure hoses is 1200 mm.
At the stand of the “Modern Transport Technologies” was represented Multipurpose first-aid appliance APP-0,2 on the all-wheel drive chassis Sadko-Next GAZ-S41A43 (4×4). The vehicle is designed to carry out works in road accidents, forest and city fires, as well as rescue operations.
Comfortable frame-panelled cabin with a plastic exterior. Cab is designed to accommodate 7 people.
The vehicle is equipped with a high-pressure water mist extinguishing unit MDVVD-30/200. The power drive is hydraulic from the engine of the chassis through the PTO. There is a set of nozzles (straight jet, sprayed jet, foam nozzle), which allow extinguishing various types of fires..
Over the years, the Salon has become a key Russian exhibition project at the federal level, focused on demonstrating the results of the implementation of state policy and achievements in the field of security in various spheres of life. More than 250 companies were able to demonstrate their developments, technologies and tools for security needs.
Results of the 20-year work of the “Prioritet” plant were highly appreciated by the Minister of Emergency Situations Evgeny Zinichev.
In total, 13 vehicles manufactured by Prioritet were exhibited on the territory of the exhibition.
Also, “Prioritet” took part in business program of the exhibition, where the company’s employees were able to get acquainted with the trends of the technical equipment of the rescue services, new forms of standardization and certification of products.
Summing up the results of participation in the ISSE-2021, we can surely say that the exhibition has determined the strategic direction of the company’s development for the near future.